• Tech

    How to Solve Wireless Connection Problems?

    While connecting office network to a wireless client, you may face the wireless connection. But, there is nothing to worry ass I have provided some of the easy and simple steps to resolve this issue.

    I have mentioned the steps in such a way that even if face problem connecting the tablet, smartphone or any other WiFi Client device to an office wireless connection.  

    Step by Step Process to Resolve Wireless Connection Error

    Check Wireless Adapter:

    You must check the client’s WiFi Adapter that is used for networking troubleshooting, just make sure that it is enabled and is ready to be connected.

    Windows PC: 

    • Got to Control Panel > Network Connections > Choose Wireless Network Adapter
    • Now, just see if it is enabled.
    • If it is not enabled, right click on it and enable the option.

    iOS Devices:

    • Go to settings and make sure that the device is not in Airplane mode.
    • Turn on the WiFi and then try to connect.

    Android Devices:

    Android users must also make sure that the phone is not in Airplane mode. Immediately disable the airplane mode if you find it enabled. Finally, try to connect to the WiFi.

    Make Use of Command Prompt:

    Go to the Wireless Client’s Start menu and run the Command Prompt. Use it to ping your router’s IP Address.

    If you are able to check the ping of your router, then check the ping of any other Wireless LAN that you would wish to share your printer or files with.

    Check Security Mismatch:

    If a connected router or wireless client can hear each other but are unable to exchange traffic, you must check for a security mismatch.

    The client should support the security mode required by your router. The client and router should consist of the same keys to encrypt traffic between them.

    You can compare the client’s wireless connection properties with the router’s WLAN security settings in order to match them.

    How To Check Security Mismatch:

    • If your router uses WPA Personal, change the client’s authentication to WPA-PSK.
    • After that, match the type of encryption. Enter the same phase on both devices.
    • Now, if your router uses WEP, change the encryption of client to WEP and match the type of authentication. If needed, you can translate from ASCII to hex.
    • What if your router uses WPA2-Enterprise or WPA? In that case, change the client’s authentication to WPA2-Enterprise or WPA respectively.
    • Match their encryption type just like you did in the previous steps.

    Check the LAN and WAN Connections: 

    Usually, people overlook the importance of physical connections. But, I think you should also keep a check on the Ethernet cables. Make sure that the cables are tight and LEDs show a green signal at both the ends.

    If you fail to find the green LED, swap the Ethernet cables to ignore damaged or corrupted cable.

    So, these are the easiest networking solutions to resolve the wireless connection problems. Yes, it’s true that you may ace a little difficulty as these are technical. In that case, you must get some professional help like the Best Networking Solution in Dubai. They have the well-trained team of technicians who can fix any network problem. 

  • Tech

    How to Fix Evolve Network Error

    It must be noted that Evolve has VPN feature which is called as an Evolve party. In the case of Evolve party, Evolve lets you create a network between you and other members.  At times you will get a network error and you may not be able to connect with the other members of the party. 

    Problems that You May face while Using Evolve:

    • Sometimes you may not be able to connect with some members of the Evolve party
    • One of the reasons could be that there is a firewall which is causing the problem.
    • The network connection could also be one of the reasons for the issue

    Steps that Evolve will take in case Evolve Network Error:

    • In case of routers that support UPnP or NAT-PMP, a port will send to your router by Evolve and this will help in resolving the issue
    • Evolve will try NAT traversal in order to fix the problem, but this again will depend on which manufacturers router you are using.
    • They may also try to send the traffic to a different server.

    You may also Like: Fix Wireless Connection

    Possible Solutions for Evolve Network Error?

    Here are some of the things that you may try in order to resolve the issue:

    • If the problem is because of the firewall then try to remove the firewall and then check if the issue is resolved.
    • You may also try to exit the part and then after some time trying to enter and check if the issue is resolved.
    • You must ensure that your router supports UPnP or NAT-PMP. If not, then try out ways and means to enable the same.
    • Try restarting the Evolve client and see if the problem gets resolved.
    • You may also try the manual port forwarding method.

    Steps in Manual Port Forwarding:

    • Pick up a higher port number for the purpose of manual port forwarding
    • Now forward the port
    • Next, you need to open the preferences tab in Evolve
    • Next, you need to select the parties tab
    • Now opt for the option of use custom ports when joining parties
    • Here you have to mention the custom port that you have forwarded in the earlier step
    • Save the changes that you have made.
    • Now try and rejoin the party and see if the problem is resolved